Mounts | Points Of View!

Place Mounts For Different And Interesting Viewer's Point Of View.

The Rails On The VholdR's Sides Enable Slide-And-Lock Secure Fast Mounting.  Simply Align The Rails, Slide Into Place Listening For A "Click".  Locked And Loaded....Ready For Action!  Now Take Us For A Ride.

SURFACE MOUNT | Included!

This mount will no doubt become standard, as this style is the most flexible, and can be used on helmets, snowboard decks, skis, fuel tanks, windows, doors and of course anything you can rig up.

This little circle of sweetness carries a very small footprint, and attaches with an adhesive pad designed for outdoor use. Once the base is set on your surface, the center of the mount detaches as a tiny-toothed circle, which locks back in with double-toothed Velcro. You can turn the smaller circle 360 degrees to capture any angle you desire.

VENTED HELMET | In The Making

Does your helmet have a bunch of holes?  C'mon, admit that you just have to have the breeze in your hair! If you do then you'll want to get yourself a vented helmet mount for your VholdR. The vented mount features an easy, but secure, strap system to get a clean profile without a bunch of duct tape. Adjustability comes from a 7 degree notch system that gives you the flexibility to mount, and then dial in your line of sight.

GOGGLE STRAP | In The Making

This flexible piece of rubber wraps around a standard goggle strap and rests comfortably against your head on soft pads. The mount features rubber grips to keep it from slipping, and is counterbalanced so VholdR won't pull the strap off your head. Adjustability comes from, well... You! This mount lets VholdR look right where you're looking, it will catch point-of-view video from your line of site, the first time, and every time

GOGGLE STRAP | In The Making

Do you have some sort of tube with a maximum diameter of 1-1/2" and a desire to mount your VholdR to it?  Then slap on the handle bar mount. This mount opens up to wrap around your tubing, and then has an adjustable compression fit system to get a tight grip on the bar for clean, steady video. Adjustment: unlock, rotate, lock, and repeat

GOGGLE STRAP | In The Making

What if you want to attach VholdR to, say, a roll cage?  Or what about the top of a windsurfing mast?  Or a hang glider support? Then for anything up to 2-1/2" in diameter, you're covered with the Roll Bar mount, which fine tunes with an adjustment wheel for capturing video from even more unique angles

EXTRA BATTERIES | PACK THEM ALONG!

Keep Shooting Your Action-Packed Life All Day with multiple lithium-ion batteries from VholdR. A New Rechargeable Lithium-ion Bbattery provides Up To 2 hours (depending upon usage and temperature) of portable power for your VholdR Wearable Camcorder

BATTERY CHARGER | PACK IN GEAR BAGS!

Keep Batteries At The Ready With This Portable Compact Battery Charger From VholdR. Now you can shoot your action-packed life with the Wearable VholdR Camcorder knowing that your batteries are charged and ready to go when you are.

> Authorized Charger
> Charge Batteries Without Need Of The Camcorder
> Charge Status Indicator LED
> Power Is Supplied Using An AC Or DC Power Adapter

> 1 AC Power Adapter Included; Has 2-Pins

The VholdR Flat Surface Mount is ideal for helmets and flat surfaces. This is our standard mount that comes bundled with the VholdR Wearable Camcorder. The mount uses an all-weatherproof removable adhesive pad that simply adheres to any mountable surface

VholdR Mount Adhesive | PACK IN GEAR BAGS!

Do you want to move your VholdR Mount to a new helmet or flat surface? Do you need a second layer of protection between the VholdR Flat Surface Mount and a curved surface? Look no further! The VholdR Mount Adhesive is tough, yet safe for painted surfac

Removable weatherproof adhesive pad
Adhesive resists water, heat and cold

Automotive grade adhesive will not harm properly painted surfaces

Everybody Recognizes The Sound Of Cracking Plastic, or the feeling of dread as we watch an expensive camera hit the ground and disintegrate into a dozen fragmented pieces.

That?s not a problem with VholdR.  We recognize through years of action sports experience that gear is subjected to abuse, and the harder the sport, the harder the abuse.

VholdR is made from brushed aluminum, baked fiberglass and rubber.  It?s guts and nerves are silicon treated and insulated from the elements, keeping you in the game, no matter the mud, the dirt, the snow and the rain.  Gravity is unwavering, and so is VholdR

It Doesn?t Get Easier Than Single Button Record Operation!

Even with gloves on, hitting the button is easy. Slide it forward and a beep indicates that VholdR is rolling. Slide it back and a beep indicates that it?s off.

Each flick of the switch creates a new file. Want ten seconds of something? No problem ? on and off. Want five minutes? No problem, on . . . and off.

IMAGE CAPTURE

It may look like just a lens, but the front of the camera houses at least 3 major elements.

Dual lasers activate on demand, sending out referencing beams indicating two pieces of information, where the camera is pointed, and if it is level.

The lens itself is a glass eye with a focal length covering the gamut, from arm?s length to infinity, which focuses visual information onto a CMOS image capture card at 640x480 resolution.

Both the lens and the capture card rotate together 192 degrees within a pivoting hermetically sealed capsule. This means no matter how you mount the camera, VholdR sees a level world.

And you thought it was just a lens